Some people would like their own customised scaffold towers. They can decide on which material to use and also the desired dimensions. They can also choose if they want it mobile or stationary.

You can build your own scaffold towers with scaffolding parts from a lot of stores. Solid scaffold towers can be built using your own measurements and with just a little background information on using the frames, cross braces, brackets, guard rail systems, ladders, jacks, decking, clamps, castors, adapters, and other accessories. In addition, there is a lot of information regarding building your own scaffold towers on the Internet. And also, there are lots of sites that sell scaffolding spare parts. A person can buy it in bulk or individual pieces according to their preference. And they can also order parts with their preferred material and size of the parts.

Here are some of the basic parts you would need to know about building a scaffold tower.

 Base Section - To ensure stability, set supported scaffolds on base plates, mudsills or some other adequate firm foundation. Supported scaffold poles, frames and uprights must be plumb and braced to prevent any displacement caused by swaying.

Access - The cross braces should never be used as a means of access. A specific access, such as a mounted ladder, must be used.

Bracing - Connect panels and frames with diagonal, horisontal, or cross braces along or as a combination, in order to laterally secure the vertical members. Because the frames are stacked, the cross braces have to keep the scaffold plumb, level, and square. All brace connections must be secured to prevent dislodging.